Tevo Tarantula Inverted Z (Single or dual)

Description

This Is My Take On The Tevo Tarantula Inverted Z. I'Ve Tried Sseveral Really Good Setups, But They Were Just A Bit Too Much. I Wanted To Streamline It A Bit, And I Used My Prusa Mk2S As A Muse. I Have Provided Files For The Original Left And Right, Top And Bottom Brackets That I Currently Use. I Have Also Updated The Top Brackets To Shorten The Skirt On One Side To Allow Taller Travel Of The Z Axis. There Is Also An Updated Set Of Bottom Brackets That Have A 5Mm Pad That Sits Under The Vertical Extrusion, In Case You Are Incorporating It With A Set Of Existing Brackets That Lift The Printer. This Just Helps Steady It Up A Little. You Can Use One Side Or The Other For Single Z, Or Use Both For Dual. This Was Part Of My Quest To Prusa-Fy My Tevo Tarantula. **Update 5/26/18** I Have Uploaded Step Files For Those That Want To Modify The Model For Their Needs. I Have Also Relabeled The Stls To Correspond To The Extrusion Size. My Tevo Is Inverted So That "Left Hand" And "Right Hand" Stuff Didn'T Make Sense To Anyone Using The Default Setup. You Will Now See 2020 And 2040 Instead. I Have Also Bundled The Z Limit Switch Bracket That I Made For These. You Can Also Find The Limit Switch Bracket Here -> Https://Www.Thingiverse.Com/Thing:2931921 Hopefully It All Makes Sense!

Statistics

Category

Tags