Raspberry Pi Camera Z-brace mount
Description
I Liked The "V-Slot Openbuilds 2020 Raspberry Pi Camera Mount" By Sonnylowe And Wanted To Print It, But I Don'T Have Any V-Slots On My Printer. So I Took The Z-Brace Mount By Pnthr And Adapted It To Fit The Camera Mount By Sonnylowe. I Remixed One Simple Piece. The Adapter That Attaches To The Z-Brace (Z-Clip A). Everything Else Is Straight From Sonnylowe'S Camera Mount. I Included All The Files Needed. I Would Try An Infill Of 10-20%, Any Higher Than That And It Gets Really Hard To Clamp The Z-Brace Base To The Rods (Which Are 5/16 Or 8Mm"). Be Careful With The Camera When Putting It In The Case. Some Ebay Rpi Cameras Have Slightly Larger Lenses. If It Doesn'T Just Drop In Easily Cut Some Of The Plastic Away With A Razor. To Put It All Together You Will Need A Bunch Of M3 Bolts And Nuts. I Used Nylon/Locknuts On Mine. I Used 2X20Mm M3S For The Camera I Used 5X12Mm M3S For The Rest Of It 7 X M3 Nylon/Locknuts
Statistics
Likes
5
Downloads
0