Clamp for 25mm pipes
Description
Pipe Clamp To Connect A 25Mm Pipe To Another 25Mm Pipe. Used For A Pipe With A Solar Panel On A Boat. You Can Connect 2 Vertical Pipes (See Photo) Or One Vertical And Horizontal Pipe Together. For Last One, Just Turn 2 Pieces 90 Degrees. They Are Symmetric. There Is Also 1 Piece With Room For A Nut Inside. This Way You Can Fit One Part (2 Pieces) At A Different Tension Then The Other Part. I My Case I Want To Be Able To Turn The Pipe With The Solar Panel (Towards The Sun). I Printed With Petg With 100% Infill. Used M6 Stainless Steel Threaded Ends And Nuts. Part Klem_Zonnepaneelv3Metmoergat.Stl Is The Same As Part Klem_Zonnepaneelv2-2.Stl, Except Is Has 4 Holes For Nuts. Use The Following Combinations Of Parts Together: - Klem_Zonnepaneelv2-1.Stl + Klem_Zonnepaneelv2-2.Stl Or - Klem_Zonnepaneelv2-1.Stl + Klem_Zonnepaneelv3Metmoergat.Stl Not Klem_Zonnepaneelv2-1.Stl + Klem_Zonnepaneelv2-1.Stl Together. I Added Also Files For A T Type Clamp. I Have Not Print This Components By Myself So Hopefully It Fits. I Just Added A Extra Hole. I Don'T Know Is It Still Strong Enough. Use The Following Combinations Of Parts Together: - Klem_Zonnepaneelv2-1A.Stl + Klem_Zonnepaneelv2-2A.Stl Or - Klem_Zonnepaneelv2-1A.Stl + Klem_Zonnepaneelv3Metmoergat-A.Stl
Statistics
Likes
32
Downloads
0