Print in Place working Fork Truck Lift
Description
Update: 9/17/17 Added The Linked Files To This Thing For Download And Another Bolt+ Nut For Snugly Fitting In The Pivot Point. Version 1.1 Has The Proper Bearing Size Also Has Other Optimizations So It Can Be Printed With No Support Still A Small Amount Of Stringing But Nothing A Little Exacto Cant Fix. If It Comes Off The Plate Fused Turn Upside Down And Use A Popsicle Stick And Hammer To Get The Carrage Moving In The Slots. Shouldn'T Take Much Force. The Nut That Fits: Https://Www.Thingiverse.Com/Thing:2520913 The Bolt I Use Https://Www.Thingiverse.Com/Thing:2518081 I Have Designed This Using: Https://Www.Thingiverse.Com/Thing:193647 One 608 Bearing Is All You Need I Haven'T Decided On My Power Plant Yet Dose Not Require Much Torque. I Have Only Seen One Similar Project, I Wanted A Fork Truck Like Lift For An Rc Car That Is Fully Printed, Well As Much As Possible. This Is My First Attempt At Modeling. Will Update As I Go I Am Printing On My Tevo I3 Clone With Pla At 200C With A Layer Height Of .3
Statistics
Likes
66
Downloads
0