stable usb microscope stand
Description
##### Just Like Many Others I Found The Cheapo Usb Orginal Microscope Stand Useless. However I Didn'T Want To Go Out And Buy Rods And Such, I Wanted To Make A Cheaper Design. I Used Rack And Pinion Design To Regulate Height. Now I Can Control The Microscope Height Smoothly And Without Wobbling. Tighten The Axel Nuts And Bolts To Your Liking. Needed: * 3 M3 Nuts And Bolts About 12-15Mm Length To Tighten The Axel So It Doesn'T Slide On Its Own And To Keep The Microscope Fastend. * The Holes Are 3.4 Mm Which Is About 1/8 Inch (In Case You Have No Love For The Metric System). Print: * With Supports On. * 0,15 Layer Height. * See Image For Recommended Print Orientation. * If You Find That Movement Is Not Soft Try To Print The Pinion With A Smaller Layer Height Or Otherwise With Higher Surface Quality.
Statistics
Likes
667
Downloads
0