Eachine BAT QX105 Alternate Frame
Description
This Is An Alternate Frame Design For The Eachine Bat Qx105 Quadcopter. The Original Carbon Fiber Frame Is Quite Fragile So Creating A Backup Was A Top Priority For Me After I Bought One. As Expected The Carbon Frame Broke On The Second Day Out. I Included Some Anti-Vibration Dampers In This Design To Help Isolate The Camera And Flight Controller From Prop Vibration, I Used The 60G Size From Here: Https://Goo.Gl/Ctfx2E But Any Similar Should Be Fine. *The Frame Supports The 10Mm Brushed Motors Found On The Eachine Qx105, Not The Smaller 8Mm Found On Most Micro Quads. There Are Two Versions, The Standard (Std) And The Minimal, The Minimal Version Removes The Dampers And The Bottom-Mounted Flight Controller And Mounts Everything On A Single Layer. There Are (Or Will Be Soon) 3Mm And 5Mm Thick Versions Of Each. The 5Mm Versions Use A Thicker Frame For Increased Rigidity And Strength, If You'Re Having Trouble With Camera Vibration Try This Version. Keep In Mind That The Motors And Camera Are Unprotected So Protect Them As Needed. Feedback Is Welcome On All Versions. The Standard Frame Comes In At Around 12.5G With The Dampers, A Bit Less Than The Original Carbon Fiber Frame. The 5Mm Minimal Version Weighs In At 11.2G. A Clip For The Runcam Nano Camera Has Been Included. Two "Foot" Designs Are Included, These Parts Are Designed To Protect The Bottoms Of The Motors And Function As Landing Pads. Chose Whichever You Like And Put One On Each Motor. To Do: Add The Zip Tie Cutouts Around The Motor Mounts To The Standard Frame. Update The Standard Camera Clip And Offer As A Separate Download. The Design Is Visually Inspired By Sirquentin'S Fireflo V3 Here: Https://Www.Thingiverse.Com/Thing:1152714 But Is Otherwise All Original. I Included A Subtle Bat Wing Design In The Arms For Kicks.
Statistics
Likes
31
Downloads
0