Dual Extrusion Fast Block Test
Description
This Is A Simple Dual Extrusion Test To Run After Nozzle Calibration. I Created This To Help Run A Quick Model After Performing The Nozzle Calibration To See If The Nozzles Are In Fact Aligned Properly. I Used To Print A Road Cone But That Takes Too Long So I Made This. Add Block1.Stl First And Then Block2.Stl, These 2 Should Automatically Align In Your Slicer. Each Block Is 3Mm Tall So If You Have To Manually Align In Your Slicer You Can Do So. Block1 Has A Circular Cutout For Block2'S Pin To Fit In. Your 2Nd Color For Block2 Should Fit Right In That Circular Cutout. Any Infill Is Fine.
Statistics
Likes
13
Downloads
0