Aristeia! Pillars
Description
Amounts Needed: ==================== (Thanks To Mr_Mich In Comments) -9X Single Pillars -6X Double Pillars -1X Triple Pillar -1X Quad Pillar -5X Half Height Obstacles For Obstacles I Use Just The Top And Bottom Single Pillar Update 12/31/2018 ==================== Adjusted The Size For All The Pegs. Now There'S A Consistent .3Mm Difference In Size For Peg Vs The Hole. The 3X Pillar Middle Was Oddly 2Mm Larger Then The Other'S Pegs So Those Are Also Consistent Now. Renamed A Few Of The Files As I Was Inconstant With Top/Bottom Naming. Removed The Alternate 4X Pillar As You Can Just Use The Slicer To Reverse Them If There'S Ever A New Board That Requires Them. Pillars For Aristeia! By Corvus Belli. There Are Individual Parts You Can Print For Each Hex Size. Print As Many Middle Sizes As Needed And Slot Together. Photo Shows Assembled Single Hex Size. This Thing Was Made With Tinkercad. Edit It Online Https://Www.Tinkercad.Com/Things/8Axd87Acbbv
Statistics
Likes
39
Downloads
0