Framemount spool holder solidoodle 2/3
Description
----Edit: Since The Me Creator 2 Is A Solidoodle Clone/Upgrade, This Might Work On That As Well. I Have No Way To Confirm This Though.---- Made A Push Fit Spool Holder For The Solidoodle 2, This Design Uses 608 Bearings. Print Both Parts Twice For A Complete Set. No Mounting Screws Required, Just Push It On The Frame, Its A Very Tight Fit. Tested With 1,5Kg Spool. I Used 20% Infill Just To Be Safe.
Statistics
Likes
3
Downloads
0