Creality CR-10 top spool holder + filament cleaner/gudie (2020)

Description

Important Update!!! Don´T Use V.2 Filament Cleaner/Guide!!!!! Read Down Below Under Update. Hi All, I Created A Spool Holder & Cleaner/Guide For Creality Cr-10. My Idea Was To Create A Mount That You Could Attached Horizontal To Top Of Your Creality, So That The Filament Goes Straight Down To The Extruder. It Took Some Time To Print All Parts But At Last Everything Fits :). In The Files (Fig13) You Will Find A Body Cap That You Can Use Some 3Mm Screws For Extra Support But I Did Not Need It Because The Body Had Perfect Fit For Mounting It To The Top Bar. I Made The Model In Different Parts So If Something Went Wrong You Can Just Reprint The Part And For Easier Assembly. The Filament Cleaner/Guide Works Absolutely Awesome And Keeps The Filament In Check. Don´T Forget To Print The Cap Fig11. Only The Filament Cleaner/Guide And Body Needs Support, The Rest You Can Just Print Without Any Support Material. Print The Body On The Back. I Used Petg Filament For The Flex And The Hard Material. No Fan Was Used For Best Adhesive Between Layers, This May Differ For Different Filament. I Used 15% Infill On All The Parts With Petg Filament. Just Ask Me If You Have Any Questions. Comment And Let Me Know What You Think About It Check Orientation Before Printing! Happy Printing And Don'T Forget To Smile ;). Update I Deleted V.2 Filament Cleaner/Guide Because The Sponge Was Getting Stuck Inside The Guide And Ptfe Tube And Stopped The Print. I Have Redesigned It With Bigger Holes Inside And A Stopper For The Ptfe Tube, The Problem Should Not Occur Any More. Use V.3 Fixed Issue With Threads Not Fitting Update 2 Added 2.3Kg Spool Arm. You Should Use More Infill To Support Larger Spools Update 3 Added 13Mm Spool Middle Holder

Statistics

Category

Tags