A gun Inspired by Legends of Tomorrow - Rip's Gun
Description
9/28 - Corrected Scale Of Frame Now V2 I Was Inspired To Build This Gun After Seeing It On The Series Legends Of Tomorrow. I Have Designed All The Prices So That Very Little Glue Is Required. The Chamber Is Actually 3 Pieces. A Dark/Black Outer Chamber, A Translucent Inner Chamber And Cap. This Way You Can Add An Led Or Two. Please Note: The Chamber Does Not Revolve. It Is Designed To Lineup With Barrel And Lock In Place. I Recommend Printing The Barrel And Chamber Pin At 50% Fill For Added Strength. I Notice After Printing The Holes In The Grips Do Not Line Up Exactly With The Frame. I Am Going To Fill Them With A Plug That Looks Like A Rivet Anyway. You May Wish To Do The Same. Also, I Recommend Spray Paint, The Brush Paint Does Not Look So Good. Or Print In Black Like I Will For The Next One To Tweak Issues. You May Need To Sand The Trigger And Hammer Pin A Bit, This Is By Design. Download Print And Enjoy. Feedback Is Welcome If Don'T Have Access To A Printer, I Can Print And Mail It To You. Just Reach Out To Me On Etsy Or Below Www.Pixi3D.Com Cheers
Statistics
Likes
72
Downloads
0