Anet A8 Original E3D v6 Carriage Bowden Mount With Proper Airflow
Description
The Original [Anet A8 | Customizable E3D V6 Carriage / Bowden Mount](Https://Www.Thingiverse.Com/Thing:2099577) Didn'T Provide An Adequate Airflow, So I Decided To Redesign It. **Note That This One Is Only For The Original E3D V6.** Full List Of Changes: * Changed The Orientation Of The Carriage In Such A Way That The Blower Fan Now Goes On The Front (Mounted On The Clamp) And The Heatsink Cooler On The Side. This Allows For The Air To Flow Freely From Left To Right. * Adjusted The Sizes Of The Two Screw Holes For The Clamp. It Should Now Be Easier To Screw It In. The Holes Use Two 3 Mm Thick And 28 Mm Long Screws For Cutting Into Wood/Plastic As Visible On The 3Rd Photo. * Changed The Shape Of The Carriage, Optimizing The Printing Time And Reducing The Material Cost. * Pushed The Mounting Hole Further Outwards, So The Heating Block Can Be Properly Oriented. Please Check 2Nd Photo For A Correct Orientation Of The Heating Block. * The Clamp Should Now Be Printed With Supports. Carriage Doesn'T Need Them. Everything Else Is The Same. Please Check [The Original](Https://Www.Thingiverse.Com/Thing:2099577) For Further Instructions About Upgrades Like The Cable Chain, Belt Tensioner, Cooling Ducts, Etc. I Have Also Included The Blender Files In Case You Want To Edit It Further.
Statistics
Likes
17
Downloads
0