Foam Dart Belt Shell
Description
This Is A Foam Dart Shell Compatible With Dart Zone'S Dartstorm Motorized Flywheel Belt Blaster. There Are Two Primary Designs For This Item: -- "Interlocking Foam Dart Belt Shell.Stl" - These Shells, While Similar To The Shells That Come Packaged With The Dart Zone Dartstorm Blaster, Are Distinct In That They Can Be Connected Together To Form A Belt Without The Need For Pins. These Shells Can Be Seen In The Attached Pictures Printed With Black Petg Filament. The Stl File For This Design With Supports Has A Flat Base That Takes Some Material Away From The Top Brim And The Outside Tube Wall. This Makes For Much Easier/Cleaner/Stable Prints, And It Does Not Seem To Affect Performance Cycling Through The Dartstorm Blaster. -- "Foam Dart Belt Shell.Stl" - This Item Is Similar To The Shells That Come Packaged With The Dart Zone Dartstorm Blaster. You Will Need Some Variety Of Pin To Lock The Shells Together To Form A Belt. I Have Found That Pointed Toothpick Ends Cut And Crimped Into Place Work Well As An Inexpensive And Ubiquitous Alternative To The Metal Pins That Come With The Stock Dart Zone Shells. Stl Files With Supports Are Included For Both Designs.
Statistics
Likes
96
Downloads
0