Desiccant case
Description
A Simple Vase Mode (Quick) Desiccant Case. After Modeling A Screw Top Container In Fusion360 And Printing It, It Took 2.5Hours To Print I Figured A Vase Mode Print Could Do It Just As Good...And I Was Right. With A Bit Of Fine Tuning I Managed To Get A Container That Is Perfect For The Job, Plenty Strong Enough And Does The Job. Watch How I Made It Here Https://Youtu.Be/Suyi2Nuwfuu I Have Provided The Stl File, A Fusion360 Export And The 2 Gcode Files I Used To Print On An I3 Style Printer. Print Time: 24Min Each Slice 2 Versions So They Screw Together. 1St: Scale: 100% 2Nd: Scale: 103% Material: Natural/Transparent Pla Nozzle: 0.4Mm Extrude Temp: 210C Build Plate: Off Spiral Mode: On Layer Height: 0.2Mm Flow: 130% Wall Thickness: 0.6Mm Top/Bottom Thickness: 0.4Mm Print Speed: 50Mm/S Cooling: 100% (Off For 2 Layers) If The Print Fails As The Thread Starts (Approx 21Mm High), Decrease Layer Height And/Or Increase Flow Rate.
Statistics
Likes
8
Downloads
0