Mini Lighsaber single piece
Description
I Liked The Mini Lightsaber, But I Found It To Be Rather Fragile, Especially At The Joints. I Decided To Remix It So That I Could Print The Blade All In One Piece. I Also Felt That The 3 Parts Connected Were A Little Too Long. The Blade Is 270Mm In Height, So Take That Into Account When Printing. I Also Laid The Joint Flat On An Edge So That It Can Be Printed With 100% Infill And Make It A More Rigid Piece And Less Susceptible To Breaking. Use A Little Bit Of Glue On Both Ends To Get A Nice Solid Piece.
Statistics
Likes
8
Downloads
0