Enclosure SMD-based geiger counter with SBT11 / SBT11A tubes by impexeris
Description
(If You Have Downloaded Files Earlier Than Evening Of September 21, Please Re-Download. I Have Made A Few Corrections) This Is A Revised Enclosure For The New - Smd Based Hardware Version Of The Diy Geiger Counter (Http://Www.Ebay.Com/Itm/162018488365 ) By My Colleague - Ebay Vendor Impexeris ( Http://Www.Ebay.Com/Usr/Impexeris) . This Enclosure Is For Use With Sbt-11 Or 11A ( Сбт-11 Or 11A ) Geiger-Müller Α,Β,Γ Tubes. At 0.25Mm Layer Height Tube Fits Nice And Tight Enough. I Use Two 11Mm Long (With Head), , ∅2Mm Screws For Enclosure Case And Two To 20Mm Long (With Head) ∅3Mm Bolts For The Tube Extension. Related Links: Http://Arduino-Geiger-Pcb.Blogspot.Com Https://Github.Com/Impexeris/Diy-Arduino-Geiger-Counter-Smd If You Found My Design Useful Or Inspiring And Would Like To Buy Me A Cup Of Espresso You Are Welcome To Tip Me: Https://Www.Paypal.Com/Cgi-Bin/Webscr?Cmd=_S-Xclick&Hosted_Button_Id=U25V96Gznvl3N&Source=Url Thank You!
Statistics
Likes
10
Downloads
0