Anet A8 spool holder for ball bearings
Description
This Is A Simple Anet A8 Filament Spool Holder. I Used Freecad To Make This. The Files Are Provided So You Can Mess Them Up. Messing Up A Freecad Project Is Very Easy You See... To Assemble You Would Need: 1X M5 Screw At Least 28 Mm Long 2X M3 Screws At Least 30 Mm Long 2X M3 Nuts And Some Washers 2X M5 Nuts 2X Ball Bearings 16Mm Outer Diameter, 5Mm Inner Diameter, 5 Mm Thick 1X Piece A Sponge Some Glue Some Thread Lock Paste (Locktite Or Similar) To Assemble, Use Some Imagination ;) Don'T Overtighten The M5 Screw Through The Bearings Because They Might Bind. Use Some Thread Lock Paste To Make Things Stay In Place. Add The Piece Of Sponge Sponge At The Bottom Of The Leaning Part Of The Stand, In Order To Add Some Friction To Prevent The Spool To Unwind Too Easily. Here Is How It Looks And Works: Https://Youtu.Be/Aorfcdlluty Unfortunately My First Print Failed So The Spool Holder In The Pictures And Video Is Shorter Than The One Intended. It Still Works Well Though.
Statistics
Likes
18
Downloads
0