Vacuum tube (8 pin) octal prototyping board enclosure

Description

My Br3Dboard For Vacuum Tube Experimentation. I Found These 8 Pin Octal Vacuum Tube Prototype Boards On Ebay: Http://Ebay.To/2Ycttaw Edit: I Decided To Go With Banana Jacks As The Common Connection (Not All Banana Jacks Have The Same Screw Diameter). You Can See The New Files Attached. Yes, I Know The "3" Text Isn'T Bold (I Blame 123Design) But It Is Still Very Usable. Better To Ship It Than Fix This Minor Issue. The Color Codes I Used On My Banana Jacks Represent A Different Pin (Mostly For A Dual Triode). Blue Is The Grid. Yellow Is The Cathode. Red Is The High Voltage. Green Is The Heaters. Be Sure You Check Your Data Sheet To Find Out Which Pins Represent Your Tube. Your Tube May Be Different. I Thought It Would Be A Good Idea To Enclose My Vacuum Tube Prototyping Board Just To Add Another Layer Of Safety When Working With High Voltages (They Can Kill You If You'Re Not Careful). You Are Using High Voltage At Your Own Risk. My Suggestion If You Are New To This Hobby Is To Stick With Lower Voltage Projects And Use This Printed Part And This Diy Project Instead. Https://Www.Thingiverse.Com/Thing:2543560 Http://Diyaudioprojects.Com/Solid/12Au7-Irf510-Lm317-Headamp/

Statistics

Category

Tags