High Clearance CR10 OEM Fang Mod
Description
This Is A Remix Of The Awesome Racush Oem Fang Mod For The Creality Cr-10 & Cr-10S It Gives Great Access And Visibility Of The Print Head While Printing. Uses All Existing Standard Parts, No New Parts Needed. The Original The Fangs Are Very Close To The Bed About 1Mm, And In Some Print Where I Had Curl On Edges It Was Catching The Printed Part. So This Is A Re-Mesh 1. Shortened The Fangs By About 5Mm Height 2. Re Angles The Jets To Ensure The Air Just Are Exactly On The Printed Part Nozzle End 3. Made The Aperture At The End For The Nozzle Smaller To Direct The Air Jets More Precisely Files Included: Simplify3D Master File Simplify3D Support Export File Gcode For A Cr-10 Printer In Pla 204Deg Nozzle And 60Deg Bed Simplify3D Profile Stl Of Just The Fang Note: If You Use The Gcode, Make Sure There Is No Bed Clips 7Cm In Both Directions From The Front Left Corner Of The Build Plate. You Can Print This Without Supports But It Does Come Out A Lot Nicer With Them. All Tacblades Designs Are Tested And Printed Before Posting. All Designs And Created With 3D Printing From The Beginning So Minimal Support And Angles Designed To Print Easily.
Statistics
Likes
1524
Downloads
0