Conic Sections Model Segmented
Description
A Bit Different Then The Multi-Extruder Model. This Comes With A Keyed Base To Assemble The Various Conic Section Pieces. There Are A Couple Options With This Design: Single Extruder, Small Volume And/Or Multi-Color/Material =================================================== Print Each Part Separately (Or In Like Color/Material Sets) Flat On The Bed Single Extruder, Large Volume Single Print =================================================== Assemble All The Pieces In Simplify 3D Or Cura (Right Click And Select All Models, Right Click And Select Merge) Into One Object At The Origin. The Model Is Designed With A 0.15Mm Gap Between All Parts Which Is (Depending On Your Settings And Printer Ability) Seens As A 1-2 Layer Gap. This Should Allow All The Parts To Print And Come Apart Save For The Bottom Most Pieces. * ** Multi-Extruder Or Multi-Material ==================================================== Same As Single Extruder, Single Print, But Will Be Multi Color/Material And Should Come Apart.
Statistics
Likes
4
Downloads
0