BM-700 / BM-800 Internal Switch Mount
Description
This Is A Switch Mount For Installing An Internal Switch Inside A Bm-700 Or Bm-800 Microphone Body. It Uses The Two M2.5 Mounting Holes On The Reverse Side Of The Frame From The Pcb. The Mount Is Tapered To Follow The Taper Of The Internal Frame, And The Top Is Curved To Clear The Body Tube. The Central Hole Should Clear A Standard 1/4" Panel Mount Switch Barrel. Possible Uses For A Switch Like This Would Be To Add A Pad, Lf Cut, Hf Cut, Etc. The Photo Shows A Metal Prototype Fitted Into A Bm-800 Body.
Statistics
Likes
3
Downloads
0