Flying Bear P902 (Tevo) Titan Mount

Description

This Mount Was Designed To Work For The Flying Bear P902 With A Tevo Titan Extruder And A E3D V6 Hotend. To Cool The Heatsink, You Will Need A 30Mm Fan To Which You Will Screw Onto The Side. You Will Also Have To Flip The Carriage Around To Make This Fit. For The "Blower Fan Shroud Short" You Will Need 2 M4 Nuts And Screws To Install It. To Mount The Shroud To The X Mount, You Will Also Need 2 M3 Nuts And Screws. Enjoy!

Statistics

Category

Tags