Watch band keeper
Description
Keeper For A Watch Band. I Used Flexible Filament To Print This, This Allows The Keeper To Grip The Excess Strap. I Haven'T Tried With Rigid Filament So I Don'T Know How Well It Will Work. To Use: 1. Fire Up Customiser 2. Measure The Width Of The Strap In Mm. Enter This Value In The **Inner Width** Field. 3. Measure The Thickness Of The Strap In Mm. Multiply This By 2 And Enter The Value In The **Inner Height** Field. 4. Enter The **Depth** Of The Keeper In Mm. This Is The Dimension Of The Keeper Along The Strap. 5. Enter The **Thickness** Of The Keeper, I.E. The Distance Between The Inside And Outside Surfaces Of The Keeper. 1Mm Works Well. 6. Select The **Edge Type** You Like; Squared Or Rounded.
Statistics
Likes
61
Downloads
0