iPod 5/6th generation Circle Case
Description
This Thing Was Made With Tinkercad. Edit It Online Https://Www.Tinkercad.Com/Things/75Dxizlrikg It Needs To Be Printed At Really Slow In Order To Obtain A Good Circle Detail. I Printed At 50Mm/S With A 20% Fr On The First Layer. And Up To 40% On The Subsecuent Layers With Circles, After That I Used 120% Fr. It Is A Little Bit Narrow. An Update Will Make It Fit Better. Note: Don'T Forget To Flip Before Printing!!!
Statistics
Likes
1
Downloads
0