Van de Graaff Generator
Description
This Is A Functional Van De Graaff Generator Made With A Lasercutter. This Machine Can Generate Sparks 20 Cm Long. Part To Cut In Acrylic 5Mm: - Lato1 (2 Pz); - Lato2Nospazzole (2 Pz); - Lato2Spazzole (2 Pz); - Spazzola_Sopra (1 Pz); - Spazzolavader (1 Pz); - Supsfera (2 Pz); - Distanziali (8 Pz). Part To Cut In Plywood 6Mm: - Base4Vader (1 Pz); - Base3Vader (1 Pz); - Base2Vader (2 Pz); - Base1Vader (1 Pz). Part To Cut In Plywood 4Mm: - Base3Vader (1 Pz); - Coperchio_Sopra (1 Pz). Lathe Pieces: - 1 Pz (Barrel Shape) Pvc Pulley 100X40Mm (Diameter) (Top Pulley); - 1 Pz (Barrel Shape) Nylon Pulley 100X40Mm (Diameter) (Bottom Pulley); Can Be Enough 1.5 Mm Difference Between Center And Sides. Other Pieces: - 4 Pz Fl08 Bearing; - 1 Pz Natural Rubber Belt 900X90Mm, Cut With V Shape And Glue With Contact Adhesive; - 1 Pz Fan Motor Like This: Https://Goo.Gl/Sp8T7X; - 2 Pz 40 Pins Male Single Row Header Strip; - 2 Pz Ikea 36Cm Blanda Blank (Http://Www.Ikea.Com/It/It/Catalog/Products/00057256/); - 4 Pz M8 Rubber Feet; - 1 Pz 175Mm M8 Threaded Bar; - 1 Pz 150Mm M8 Threaded Bar. - 36 Pz M3X16Mm (Acrylic Joints); - 8 Pz M5X16Mm (Bearing); - 4 Pz M5X30Mm (Brush Support); - 4 Pz M3X25Mm (Sphere Support); - 4 Pz M6X40Mm (Base Union); - 2 Pz M4X20Mm (Motor Support); - 1 Pz M6X25Mm (Ground Point); - 1 Pz 50Mm Rubber Pipe (Internal Hole 5Mm); - 2 Pz Hose Clamps; And Some Nuts, Washer And Wire. I Added A Fan To Cool The Motor When It Work For Long Time.
Statistics
Likes
74
Downloads
0