Foscam C1, C1 lite, C2 adjustable arm
Description
After Mounting Two Of My Foscam C1 Cameras Under An Eve I Noticed That They Both Show Up As Slightly Tilted. This Annoyed Me To The Point That I Did Something About It. I Believe The Usability Extends Beyond My Need As This Will Allow You To Mount The Camera At A 90 Degree Angle, Or Extend The Length Of The Camera From The Base As Needed. Please Print The Screw Portion (Side 1.Stl) With 100% Fill As I Have Found That It Is Easy To Break The Screw Off If Using Too Much Force. If You Have Simplify3D You Can Configure It To Print A 15% Infill For The First 5Mm And Then Jump To 100% For The Remainder. This Is My 3Rd Revision And Seems To Work Well For The 8 Of The Foscam C1'S That I Have Around The Property.
Statistics
Likes
23
Downloads
0