Frame/Stand for Raspberry pi zero + FlashAir + CameraModule
Description
Frame/Stand For Raspberry Pi Zero + Flashair + Cameramodule This Item Was Designed To Support Various Small Development And Experiments With Rpi0+Cameramodule And Flashair. And Designed Based On Thing:803447 And Thing:1177271 ・Supplemental Japanese Documents Are Available Http://N-2750.Cocolog-Nifty.Com/N602/2017/09/Framestand-For.Html -Autodesk 123D Files; Zerodev057_C15.123Dx Stnd-Unt_Atd012.123Dx -Stl Files; Zerodev057_Bs.Stl Zerodev057_Cv.Stl Zerodev057_Cambdy.Stl Zerodev057_Cambdy5.Stl Zerodev057_Camcvr.Stl Zerodev057_C15-Clp1.Stl Zerodev057_C15-Clp2_.Stl Su012-Arm-L.Stl Su012-Arm-R.Stl Su012-Dmybtry.Stl Su012-Leg-L.Stl Su012-Leg-R.Stl Su012-Stndbs.Stl [Requirement] -Raspberry Pi Zero V1.3 Or W Is Recommended. -Raspberry Pi Camera Module (If You Have Rpi0 V1.3 Or W) Camera Module V1 Or V2 And Cable For Pi Zero -Flashair Https://Flashair-Developers.Com/En/ -Microsd <--> Sd Converter Henkan-Neijin "Sdb-Tfa" Http://Www.Henj.In/Memory.Html Or Akizukidenshi Ae-Sd (K-10967) Http://Akizukidenshi.Com/Catalog/G/Gk-10967/ And Some Pin Headers/Connectors [Ex.: Http://Akizukidenshi.Com/Catalog/G/Gc-05779/ Http://Akizukidenshi.Com/Catalog/G/Gc-00167/ Http://Akizukidenshi.Com/Catalog/G/Gc-01627/ Http://Akizukidenshi.Com/Catalog/G/Gc-02762/ Etc. ]...It Is Necessary To Solder Several Wires On The Back Side Of Rpi0. And It Is Also Necessary To Solder Several Pin-Headers/Connectors On The Ae-Sd. The Sd Signals (Pp14-19 Etc.) Are Exposed On The Back Side Of Rpi0 V1.3. I Referred Https://Www.Raspberrypi.Org/Forums/Viewtopic.Php?F=63&T=175504 To Get Important Informations About Pp14-19 Etc. I Am Grateful To The Authors Of That Thread. [Optional Items] -M2.6 10Mm Bolt&Nut X 5 Pairs. -M2.6 8Mm Bolt&Nut X 1 Pair. When The Stand Unit Becomes Loose And It Becomes Difficult To Keep The Tilt Angle, Please Tighten It With Bolts And Nuts. -Cylindrical Shaped Mobile Battery Case(Dia.=22Mm) Ex: Http://Www.Aitendo.Com/Product/12459 And Li-Po Battery 18650 -Adafruit Cobbler For Rpi0 "Assembled Pi T-Cobbler Plus - Gpio Breakout - Pi A+, B+, Pi 2, Pi 3, Zero" Https://Www.Adafruit.Com/Product/2028 ---------- [ 10/3/2017 ] - One Item, "Box_269-St26" And 5 Pictures Were Added. -"Box_269-St26"; Raspberry Pi 2B/3B Mount-Plate. [Notice]; "Raspberry Pi B+/2B/3B Simple Case 2" (Thing: 2347622) Is Required. --> Https://Www.Thingiverse.Com/Thing:2347622 Please Refer To "Box_269-St26.123Dx" And Pics. Stl File; Box_269-St26-Bs1.Stl , Box_269-St26-Bs2.Stl Autodesk 123D File; Box_269-St26.123Dx
Statistics
Likes
6
Downloads
0