Minifig TP Holder - Wall Adapter
Description
I Like ***Scratchax'S **Minifig Tp Holder* Https://Www.Thingiverse.Com/Thing:1277045. I Made One ( Https://Www.Thingiverse.Com/Thing:1996077 ) And Attached One To The Wall Using A Wall Adapter I Designed That Works With The Hardware Already Installed Into The Wall - See Picts. Used M4-0.7 X 12Mm Machine Screws. Need To Heat Up The Holes With A Lighter For 1-2 Seconds And Gently Insert And Screw In The Screws Before Mounting. Let Cools ~5 Minutes Before Mounting. I Also Added 2 Small Pieces Of Command Tape At The Top, Between The Wall And The Backside Of The Wall Adpater, Near The Minifig Mounting Tabs For Stability And Strength. To Fit And Use Mega Size Rolls I Needed To Turn The Hands Outward And None Of The Rods I Found On Thingiverse Met My Needs So I Created My Own. See Https://Www.Thingiverse.Com/Thing:2556281 For That Design. Will Need To Print With Supports. Minifig Tp Holder Should Fit Right Onto The Adapter And Slide Down And Have Its Arms Be Above The Wall Mounting Blocks.
Statistics
Likes
14
Downloads
0