Anet A8 auto off
Description
I Want Over 200Mm Automatic Shutdown Height If I Print Some Tall/Looong Jobs.. Extruder Shutdown Height Is About 227Mm. I Also Litlebit Modified Switch_Pusher With Tinkercad To Stronger Than Orginal.. I Use Hotglue On Switch_Holder. Https://Www.Youtube.Com/Watch?V=Qv-A6Onbzew Copy Paste These Start/End-.Gcodes To Your Slicer. (I Use Cura) (You Have To Find The Right Movements On :G1 Z229 F3600 ; Move 229Mm To The Top G1 X198 F3600 ; Move 198Mm To The Right) Start.Gcode: ;Sliced At: {Day} {Date} {Time} ;Basic Settings: Layer Height: {Layer_Height} Walls: {Wall_Thickness} Fill: {Fill_Density} ;Print Time: {Print_Time} ;Filament Used: {Filament_Amount}M {Filament_Weight}G ;Filament Cost: {Filament_Cost} ;M190 S{Print_Bed_Temperature} ;Uncomment To Add Your Own Bed Temperature Line ;M109 S{Print_Temperature} ;Uncomment To Add Your Own Temperature Line G21 ;Metric Values G90 ;Absolute Positioning M82 ;Set Extruder To Absolute Mode M107 ;Start With The Fan Off G28 ;Home G92 E0 ;Zero The Extruded Length G1 F200 E3 ;Extrude 3Mm Of Feed Stock G92 E0 ;Zero The Extruded Length Again G1 F9000 M117 Printing... And End.Gcode End G-Code: ;End Gcode M104 S0 ;Extruder Heater Off M140 S0 ;Heated Bed Heater Off (If You Have It) M104 S0 ;Extruder Heater Off G91 ;Relative Positioning G1 E-1 F300 ;Retract The Filament A Bit Before Lifting The Nozzle, To Release Some Of The Pressure G1 Z+5.5 E-5 X-20 Y-20 F{Travel_Speed} ;Move Z Up A Bit And Retract Filament Even More G90 ;Absolute Positioning G1 Z229 F3600 ; Move 229Mm To The Top G1 X198 F3600 ; Move 198Mm To The Right G1 X-10 F3600 ; Move 8Mm To The Left M84 ;Steppers Off G90 ;Absolute Positioning
Statistics
Likes
160
Downloads
0