Duplo compatible fully printable train wagon
Description
My Goal Was To Make A Fully Printable Wagon Compatible With Lego Duplo Train Set. I Decided To Replace Steel Axles (Separately Purchased) With Printed Ones. Some Notes On My Default Settings: - The Frame, The Platform And The Hook Printed With Abs (200Um) - The Wheels And The Axles Printed With Pla (200Um For Axles And 150Um For Wheels) - In My Case Supports Were Required For Wheels Only - Print Axles In Pairs, They Are Thin And High (40Mm) And Slowing Down The Print May Be Neccessary At Some Point - The Finished Wagon Is Rigid, But Be Gentle While Assembling (It Is Not Difficult To Brake The Frame If Platform Connection Slots Are Too Tight) - Sanding May Be Required While Fitting Parts Together (Wheels And Axles, Platform And Frame) - Axles Are Connected With Wheels Using Super Glue The Finished Wagon Is Pretty Light: 48G Compared To 58G Of Original One. The Wheels Need To Be Rotated Before Slicing Of Course :-) Https://Youtu.Be/Wfgxfvomllc
Statistics
Likes
168
Downloads
0