VEX Robotics Match Controller and Raspberry Pi Case
Description
See The Latest Version Here Https://Www.Thingiverse.Com/Thing:2749903 Update: V2.0 - 10-7-17 - Fixed Part 2 Tolerating On The Pi Mounting Points - Fixed Alignment Of Part 2 With The Pi I/O Ports - Fixed Plastic Thickness On Part 2 For The Attachment Of Part 3 Raspberry Pi 3 And Vex Robotics Match Controller Mount To Attach To The Back Of The Vex Field Monitor Stand Or Standard 100 X 100 Mm Vesa Screen Mount. Part 1 And 2 Are The Components That Make Up The Case Part 3 (Optional) Is Just A Field Identification Tag That Could Be Customized Per Event, A Few Options Are Provided. Required Hardware: - 4X 8-32 X 7/8" Socket Head Cap Screws (Attach Case Top And Bottom Shells) - 2X 8-32 X 1/4" Optional Mounting Hardware For Part 3 - 4X 4-48 X 1/4" Socket Head Cap Screws (Attach Pi To Case) - 4X M4 X 0.7 X 8 Mm Socket Head Cap Screws (Attachment To Vesa Mount Or Field Monitor Bracket) Standard 8-32" Vex Screws Can Be Used To Assemble The Case. I Believe A M4 Socket Head Cap Screw Could Replace The 8-32 Machine Screws, However I Have Not Personally Tried That. Assembly: - Part 2 Should Have 4 Clearance Holes For 8-32 Screws - Part 1 Should Have 4 Interference Fit Holes For 8-32 Screws To Thread In - The 8-32" X 7/8" Screws Should Slide Though Part 2 And Through The Vex Match Controller And Thread Into Part 1 Joining The Top And Bottom Half'S Of The Case Together (See Pictures)
Statistics
Likes
7
Downloads
0