L96/MB01 flash hider
Description
### Why My Well Mb01 Came With A 26Mm Cw Threaded Outer Barrel And, While I Have Already Made An Adapter To 14Mm Ccw, I Have To Admit "Native" Flash Hiders Just Look Better. So Here'S A Flash Hider That Screws Directly Into The Outer Barrel. The Threads Are Not Modeled To "Line Up" The Flash Hider Into A Horizontal Position, So You May Want To Use An O-Ring As A Spacer If Yours Doesn'T Line Up. ### Features * Pre-Modeled Threads. The Thread Pitch Isn'T Perfect, But That Does Make It Fit Rather Snugly. * Fits My Mb01, But Should Also Fit The Mb08 And Other Maruzen Clones. Possibly Even The Mb44 Series. ### Instructions * Print It In Petg With Multiple Walls And Slow Speed To Get The Strongest Part. * No Supports Required If Printed Upside Down, But You Do Need Good Overhang Performance+Cooling On Your Printer. * .2Mm Layer Height Is Fine, But .15 Or .10 Does Look Better * If It Doesn'T Fit, Your Printer Calibration May Be Off. Try Printing It At 99 Or 101% Scale If This Is The Case. ### Open Source As Always The Original Design File (Fusion360) Is Included, So Feel Free To Improve It (Or Learn From It)!
Statistics
Likes
22
Downloads
0