Kitty Kube Wrap
Description
This Cube Allows One To Neatly Store Their Charging Cable Without It Getting Tangled. There Is Also A Circular Cat Tail Cutout Which Also Provides A Snug Crevice To Prevent The Cord From Unraveling. This Kitty Kube Is Modeled After The Iphone'S Official Charging Cube Opposed To An Off-Brand Charging Cube. There Is Some Wiggle Room For The Cube To Fit Into But I'Ve Found It Fits Fairly Snug With A Sticker Layer Sandwiched Between The 3D Print And Actual Charging Cube. I Would Recommend Filing Down Some Of The Cube So Any Excess Material Does Not Obstruct Your Usage. The Cord Cutout Tail Might Be The Most Difficult As Different Cords Have Different Diameters. Mine Printed A Little Smaller Than Expected, So I Would Advise Double Checking Your Measurements Before Printing. Thanks For Exploring My Design, Any Feedback Would Be Greatly Appreciated! If You'Re Interested In Any Of My Other Projects, Check Out My Website! Https://Www.Tessa-Wheeler.Com/
Statistics
Likes
23
Downloads
0