VTOL: Chimera & Volcano blower fan-duct
Description
When You Want Ducts For The Volcano Or The Chimera There Are Plentyfull, But When You Want A Duct For Both, No Luck. Also, Lets Be Honest, The "Regular Fans" Or "Axial Fans" Arent Very Powerfull And Volcanos Run Fast And Hot. Thus, Blowerfans. More Powah! I Highly Recommend Em To Anyone. Soooo Much Better. Vtol Stands For "Vertacal Take-Off And Landing" Used In Aircraft Cabable Of Taking Off Without A Runway Such As The Harrier Fighter-Plane Or Just Plain Helicopters. "Wait, Whaa?" - Cmon, Just Look At It. And Yes, Its "Overkill" But Mainly Because Blowers Are Noisy. Running Em At Lower Rpm Is Nice And Silent And You Get Far Better Performance. Size Of The Small Blower-Fans Is Mostly Universal So They Just Clamp On. Scaling Up Or Down 1-2% Might Help. The Red Part Is A Heavily Modified Version Of A Part Made By Lv Or Something... Glory To Him! *Hic!" The Vtol Simply Screws In On The 40Mm Regular Fan Cooling The Chimera Heat-Sink. Despite Its Size Its Not That Heavy. You Can Use All Four Blowers Or Leave The Second Row Off Completely. The Nozzles Are Aimed Towards The Part, Not The Printer-Nozzle And Have Some Distance To It. Great Bridging Performance. E3D Silicone-Sock For The Heatblock Recommended Or Upping The Fan-Speeds By 10% Per Layer Or It Might Cool The Block And Kill The Print On Low-Heat-Warnings. You Can Mix-Match The Parts Some, Use Both The Vertical And The Horizontal Mounts Or Two Of One Type Depending On Your Setup Or Needs. Some Modification Might Be Needed. The Side Support-Beams Can Be Turned Upside Down To Raise Or Lower The Second Row Of Blowers. I Printed Mine In 0.3 Layers With No Supports. Excuse The Ugly Quality. Made Simply Because I Needed One And While Ugly And Plain Huge, It Sure Does Work. Use It And Abuse It.
Statistics
Likes
2
Downloads
0