VERTEX NANO PART COOLING FAN 2.0
Description
New And Improved Version! 2.0! Changelog: Improved Fan Cowl Design To Provide More Clearence In Y Carriage. Redesigned Part Blower Nozzle To Increase Flow Rate Dramatically. Removed Non-Essential Overhanging Features To Improve Print-Ability. Strengthened Clamping System To Improve Alignment At Temperature. This Is A Part Cooling Fan System And Main Cooling Fan Cowl All In One. You Do Not Need To Modify Firmware! Everything Fits Without Modification, You Dont Even Need To Disassemble Your Printer, Just Remove The Clip And Pull The Hot End Assembly Out. In Order To Use, You Will Need: A 30Mm Fan. 8X M2 Screws Or Similar Which Extend 2Mm-4Mm Beyond The Length Of Your Fans. (Typically 25Mm Fans Are 10Mm Long, So Get 12-14Mm Screws. The Stock 30Mm Fan Is Also About 10Mm Thick, So The Screws Should Work For That Too. Wiring To Power Your New Part Cooling Fan. You Can Wire It To The Mianboard As There Is A 12Vdc Out There, But I Sigguest External Power. If You Want To Do It Quick And Easy, Just Splice The New Fan Into The Old Fan'S Leads.
Statistics
Likes
8
Downloads
0