Titan/Drakon/NSTT or other geared extruder mount for 2020 (HyperCube)

Description

In An Effort To Keep My Bowden Tube As Small As Possible, To Reduce Filament Play, I Mounted The Extruder To The Top Of The Frame At Halfway Along The Y Travel. This Bracket Allows A Geared Extruder To Sit With The Gear Facing Inwards And The Adjustment Facing Outwards. I Have Tested Fitment With A [Genuine E3D Titan](Https://E3D-Online.Com/Titan-Extruder) And [Axmod'S Drakon](Https://Www.Thingiverse.Com/Thing:2172854), I Also Assume [Paciente'S Nstt](Https://Www.Thingiverse.Com/Thing:2090259) Would Fit As Well. If Not, Openscad Source Is Included So You Can Modify The `Off` Variable To Move The Motor Out More. The Provided Stl And The Clear/White Bracket In The Photo Is For The **Right Hand Side** Of The Top Of The Frame. You Could Also Mirror The Model In Your Slicer To Mount On The **Left Hand Side** As Shown In The Photo Of The Red Bracket. The Provided Stl Prints With A 3Mm Thickness Between The Motor And The Extruder Body. If You Want A Thicker Bracket, Modify The `Mpt` Variable.

Statistics

Category

Tags