Joystick
Description
This Is A Joystick Concept I Have Been Playing With For A While. :-) It Is Based On 3 Potentiometers And An Arduino Nano. I Have Tested It And It Works Very Well. :-) In The Pictures I Also Added Rubber Bands To Force It To The Center. The Glue Holds The Rubber Bands In Place. Yes, It’S Not A Delicate Solution, But It Works. :-) I Also Added A Photo Of A Test With A Drawing Arm. I Invented A Very Difficult Way Of Drawing. :-) You Also Need: 4X Bearing 624Zz (Diameter 13Mm, Thickness 5Mm, Hole 4Mm) 1X Bearing 635 (Diameter 19Mm, Thickness 6Mm, Hole 5Mm) 6X M4X20Mm And 6 Nuts 4X M3X20Mm And 4 Nuts 2X M3X10Mm And 2 Nuts 3X Potentiometers (B1 P160Kn3K) I Used 50K Ohm Because I Had Those. See Print Screen For Dimensions Printed In Pet-G, 0.2Mm Resolution
Statistics
Likes
183
Downloads
0