Kossel 2020 Heat Bed Mount
Description
Designed For Kossel Frame With 240Mm Horizontal 20X20 Aluminium Extrusions And 200Mm Dia. Print Bed With Kapton Heater. You Will Need A Piece Of Ceramic Fibre Blanket To Go Underneath The Print Bed. Ramps Mounting Bracket Included. There Is No Hole To Run Heat Bed Cables, You Will Have To Use A Drill.. I'Ve Been Planning To Use Openbuilds Standoffs But They Might Heat Up Too Much So The Best Option Would Be To Use Teflon Ones.. Something Like Http://Www.Ebay.Co.Uk/Itm/Ptfe-Teflon-White-Tube-Pipe-2-To-3Mm-Wall-10-To-18Mm-Od-6-To-12Mm-Id/222625547740 Ideally, It Should Be 10Mm Dia. Tube With 3-4Mm Hole, Cut To 9-10Mm ... Bom: - 3 X Bed Support Pieces (Abs - 50% Honeycomb Infill) - 3 X Openbulids 9Mm Standoffs - This Should Be Replaced With Teflon Ones.. - 3 X M3 15Mm Din 912 Bolts With Nuts - 6 X M5 8Mm Button Head Bolts - 3 X M3 6Mm Din 912 Bolts With Nuts - For Ramps Bracket Enjoy!
Statistics
Likes
20
Downloads
0