Bfight210 RunCam Micro Swift Camera Mount
Description
This Is A Mount That Attaches To The Front Frame Spacers On The Bfight210 Quadcopter Frame. The Included Carbon Fiber Mounts Are Too Wide For The Runcam Micro Swift. These Help A Micro Fit Perfectly. The Back Side Of The Mounts Were Slimmed Down Because Of The Limited Space Between A Mounted Flight Board And The Spacers. I Printed 2 Of These Out Of Tpe (It'S Like Tpu) With No Supports On My Anet A8. I Did Print The Adhesion Plate But I Don'T Know That It Is Really Necessary. The "V2" Mount Is A Little Thicker And The Screw Holes Are A Little Less Shallow Allowing For Longer Mounting Screws To Be Used. The "V3" Mount Is A 5Mm Longer Version Of The "V2". You Can Buy Your Own Bfight210 Frame Here: Https://Www.Banggood.Com/Bfight210-210Mm-Carbon-Fiber-Fpv-Racing-X-Frame-4Mm-Frame-Arm-P-1181906.Html?P=6Z050013977120130325 Check Out The Bfight210 Top Plate With Shark Fin And Axii Holder: Https://Www.Thingiverse.Com/Thing:2790311 This Is My First Uploaded Thing To Thingiverse.
Statistics
Likes
48
Downloads
0