Ford Escort Key
Description
This Is A Replacement For The Plastic On A Old Ford Escort Key. The First Image Shows The Broken Original (Left) And The Printed (Right). Recommendations For The Build: - Print With Abs And Use Acetone On The Pins For Sturdiness. - 15% Support - 100% Infill - 5 Lines Brim Edit: - Print A Little Larger (Eg. 105%, Not Sure Which Scale Is Best), Because The Gap For The Metal Is Slightly To Small. I Printed With 100% And Heated The Metal Before Insertion, Which Worked Too. - The Pins Are Not Necessary And Far To Long, Especially If Support Is Not Removed Completely. (I Used Aceton-Melted Scrap Pieces Of Previeos Projects As Glue.
Statistics
Likes
9
Downloads
0