Thick Lacquering for PLA Models
Description
Fill The Remaining Grooves On The Surface Of The Pla Models And Build A Thick Coat To Further Protect It. This Way Is Suitable For Models With Simple Shapes, But It Is Not Suitable For Models With Complex Shapes. ##⚠Cautions - Ventilate The Room During Painting/Drying/Vaporing - Do Not Place The Painted Pla Models Near The Fire ##🛒Requirements ###🎨For Lacquering - 1 X <Font Color="Deeppink">Sanding Sealer</Font> - Choose A Sanding Sealer Containing Nitrocellulose As A Substrate - Choose A Sanding Sealer With High Ratio Of Ethyl Acetate Or Butyl Acetate As Solvent - Use As A Top Coat Of Third Layer - If You Are Concerned About Patterns Appearing On The Painted Surface, Use The <Font Color="Deeppink">Nail Top Coat</Font> - In Case Of Emphasizing Safety, It Is Good To Use Paint Not Containing Nitrocellulose As Top Coat (However, Smoothing With Acetone Vapor Becomes Impossible) - Mix With Starch Or Ink Respectively To Use For Under/Middle Coat Of Second/Third Layer - When Mixing, Slowly Rotate The Container - Bubbles Appear When Using Ice Cream Sticks - 1 X <Font Color="Deeppink">Starch</Font> (Corn Or Potato Etc...) - Mix With The Sanding Sealer And Use It For The Sealing Of The First Layer - Use Ice Cream Sticks When Mixing - When Starch Is Mixed With Sealer, Bubbles Rarely Appear - \* X <Font Color="Deeppink">Refill Inks For Permanent Marker</Font> - Choose Your Favorite Ink Color - Mix With The Sanding Sealer And Use It For The Painting Of The Second Layer - When Mixing, Slowly Rotate The Container - Bubbles Appear When Using Ice Cream Sticks - \* X <Font Color="Deeppink">Jam Jars</Font> - Use As A Container For Paint Mixed With Sanding Sealer And Starch/Ink - \* X <Font Color="Deeppink">Ice Cream Sticks</Font> - Use For Mixing The Paint Of First Layer - Use To Substitute For Brush - \* X <Font Color="Deeppink">Wet Sandpapers</Font> (400-1000 Grit) - Use To Sanding Each Layers ###🚿For Acetone Vaporing - 1 X <Font Color="Deeppink">Acetone</Font> - Exposure To Acetone Vapor For 5 Minutes Will Smooth The Coated Surface - 1 X <Font Color="Deeppink">Big Jar</Font> - I Used A Pet Jar And A Polypropylene Lid, But It Good Worked Without Dissolving In Acetone - Use To Upside Down - 1 X <Font Color="Deeppink">Paper Towel</Font> - Drop Acetone On A Paper Towel And Vaporize It - 1 X <Font Color="Deeppink">Aluminum Foil</Font> - Stick To The Inside Of The Big Jar Lid And Place The Pla Model On It - 1 X <Font Color="Deeppink">Pvac Glue</Font> - Use To Stick The Paper Towel Inside The Big Jar - Use To Stick The Aluminum Foil To The Inside Of The Big Jar Lid ##🔗Reference Links - Lacquering Related Links - [Use Of Sanding Sealer And Primer](Https://Stunthanger.Com/Smf/Paint-And-Finishing/Use-Of-Sanding-Sealer-And-Primer/) - [Rcu Forums - Finishing With Dope And Talcum Powder](Http://Www.Rcuniverse.Com/Forum/Control-Lines/5377178-Finishing-Dope-Talcum-Powder-Print.Html) - Acetone Vaporing Related Links - [Cold Acetone Vapor Polishing](Http://Forums.Reprap.Org/Read.Php?1,331088) - [7 Steps To Shiny Porcelain Finish On 3D Printed Abs Parts With Acetone](Https://Airwolf3D.Com/2013/11/26/7-Steps-Shiny-Finish-On-Abs-Parts-Acetone/) - 3D Models Used For Slideshow Images - [Sweetheart Flowers By Makerbot](Https://Www.Thingiverse.Com/Thing:42877) - [Toothbrush Holder For Tray (V2)](Https://Www.Thingiverse.Com/Thing:2530428) - [M18X2.5 Nut Spinner](Https://Www.Thingiverse.Com/Thing:2438892) - [Diep.Io Tank Set Tier 3](Https://Www.Thingiverse.Com/Thing:1989452)
Statistics
Likes
55
Downloads
0