Anet A8 Moving Fan Bracket
Description
This Is A Remix To Anet A8 Extruder Fan Modification V2 By Hadoko. I Put A Little More Meat On The Front Bracket. The Side Bracket Now Holds A Bl-Touch Sensor. Use The Settings From Oderwat Bl-Touch Setup. Https://Www.Thingiverse.Com/Thing:2091529 The Only Thing Is That You Will Need To Change The Offsets For This Bracket. I Had Them As Follows And They Worked Just Fine: #Define X_Probe_Offset_From_Extruder 14 // X Offset: -Left +Right [Of The Nozzle] #Define Y_Probe_Offset_From_Extruder 53 // Y Offset: -Front +Behind [The Nozzle] #Define Z_Probe_Offset_From_Extruder 0 // Z Offset: -Below +Above [The Nozzle] You Travel Limits Will Be Different Also. This Is What I Had For A 200X200 Bed: // Travel Limits After Homing (Units Are In Mm) #Define X_Max_Pos 220 #Define X_Min_Pos -33 #Define Y_Max_Pos 220 #Define Y_Min_Pos -10 #Define Z_Max_Pos 240 #Define Z_Min_Pos 0
Statistics
Likes
4
Downloads
0