Just another filament cleaner
Description
First Off, Let Me Please Ask That If You Like These Designs And Find Them Useful Please Do Like, Follow And Share My Content. And If You Have Any Ideas Or Concepts To Modify The Content I Would Love To Hear! Also, A Shoutout To All The Filament Cleaners Out There Keeping All Our 1.75Mm And 3Mm Filaments Clean And Our Nozzles Jam Free Since They First Started Popping Up. I Have Been Playing With Threads Lately And Wanted To Adapt What I Was Producing To The Pre-Existing Concept. You Have Two Parts, You Cut A Chunk Of Foam That Will Fit Snuggly In The Cavity And Then You Screw Them Together Nice And Tight, Slip Your 1.75Mm Or 3Mm Filament Through The Orifice And Out The Opposing And Let It Pull Up Tight Against Your Extruders Input. It Can Go Either Way On Your Printers Filament, Though It Has To Have The Filament Poked Through It, So Get Ready To Retract Your Plastic To Put This On. If I Get There For A V2 I Will Amend It So It Can Be Placed Onto The Filament Without Having To Thread It Through The Assembly. Take It And Do With It What You Wish. For Me It Works Really Well. And Again A Shoutout To The Others That Are Producing These Things, Especially The Ever So Popular Https://Www.Thingiverse.Com/Thing:492067 It Is Designed Lightly, So Be Sure To Follow The Print Instructions And Print A 0.4Mm Wall Thickness With A Decent Infill. I Use 28% Infill (My Lucky Number). Be Sure To Print The Parts The Right Way Up To Avoid Using Supports, And Keep That Part Cooling Fan On So As To Avoid Curled Edges On The Overhangs.
Statistics
Likes
95
Downloads
0