Creality CR-10 Bed Stabilizer
Description
Fixes 3 Major Problems With The Heated Bed On The Creality Cr-10. 1. The Bed Support Springs Are In Contact With The Aluminium Bed And In My Case Touches One Of The Heater Traces. Eventually It Will Short Out The Heater. 2. When The Bed Is Set To 0.2 Mm Height From The Hot End The Springs Have Very Little Tension 3. The Bed Will Wobble On The Springs In The Original Configuration. Solution: 1. Provides A 2Mm Pad Between The Spring And The Heated Bed. 2. Compresses The Springs By An Additional 4 Mm 3. Provides A Low Tolerance Guide For The Bed To Be Adjusted And Thus Eliminates All Bed Wobble.
Statistics
Likes
27
Downloads
0