Silencer \ suppressor \ moderator (lead dust collector) for airgun.

Description

*** I Do Not Take Any Responsibility And I´M Not Liable For Any Damage Caused Through Use Of This Product. Always Be Careful And Use Required Safety Equipment. *** ***Update 24/10/17: Version For 1 Inch Pvc Pipe*** ***Update 26/3/18: Added Extension Baffles, 20Mm And 40Mm In Length*** This Is A Modular Silencer (Or Lead Dust Collector) Designed For A 4.5/5.5Mm (.177/.22Cal) Pcp Air Rifle. Could Be Usable For 6.35Mm (.25Cal ) As There Should Be Enough Clearance For The Pellet But I Have Not Tested It For This Caliber. *** Right Now It Is Threaded For 1/2 Unf X 20 *** As It Is Widely Used. All Pieces Are 36Mm (Inner) /40Mm (Outer) In Diameter. Baffles Are 20Mm In Length, Threaded Barrel Cap Takes 15Mm And The End Cap Takes 10Mm Of Room In Length. Use 36Mm (Inner D) / 40Mm (Outer D) Pipe For The Body. In The Photos I´Ve Printed 10 Pieces Of Baffles (Petg) So The Length For The Body (Pipe) Would Be: 10X20Mm + 15Mm +10Mm = 225Mm. I´M Using Pvc Pipe For The Outerior For It Is Cheap, Light And Easily Available In Hardware Stores. I Suggest Using Epoxy Or Strong Glue For The Threaded Barrel Cap And Using 2-3 Scrub Crews (You Need To Make A Hole And Thread Them) For The End Cap. This Way You Can Remove One Of The Caps And Service The Inner Pieces If Needed. I Used Pla On My First Version (Painted It Black) And I´Ve Shot Over 500 Shots With It, Still Working Well And In One Piece. My Rifle Is Regulated And Modified Hatsan At44 With 25 Foot-Pounds Of Energy (15.89Gr Going 850Fps). I Suggest Using Abs Or Pet(G) If You Can For More Strength. Pieces In Photos Are Printed In Transparent Petg. Is It Any Good? This Is Hands Down The Best Silencer I´Ve Ever Used On My Rifle (Used 8 Baffles).

Statistics

Category

Tags