RC Jet boat pump
Description
This Jet Pump Was Designed As A Modification To A Old R/C Boat I Have. With An Impeller Diameter Of 26Mm It Is Quite Large For The Scale Of The Boat. The Intake Features Intake Strakes To Minimize Ingestion Of Pond Weeds And Was Designed Around The Input Shaft In A Brass Sleeve With A O/D Of 5Mm. The Nozzle Has A Turning Angle Of 50 Degrees And Uses A 1.5Mm ~ 40Mm Long Steel Pin As Pivot And Means Of Controlling The Nozzel
Statistics
Likes
761
Downloads
0