Safety 1st key
Description
Safety 1St Replacement/Backup Key. I Printed This At 0.16 Mm Height. Also Keep In Mind The Bottom Of The Key Is Only 0.2 Mm Thick. Adjust Your Print Settings Accordingly. I Used Some Ebay 25X2Mm Magnets Which Are Unfortunately A Little On The Weak Side. I Modified The Design So Two Stack, And I'Ve Found That Has Been Enough To Trigger My Locks. I Highly Recommend You Source Good Magnets For This Project. Superglued Everything Together, Clamp It And Let It Sit For A Day Before Using.
Statistics
Likes
1
Downloads
0