Cord Holder with a magnet
Description
The Hole For The Magnet Is 7.3 X 3Mm So It Should Fit A 7Mm Neodymium Magnet, Bit Of Super Glue/Epoxy Glue. The Magnet Is On Top To Make The Center Of Gravity Below It (So It Will Hang Naturally). The Channel Is Angled By 1.5 Degrees (I Should Have Made 2 Or 2.5). So Theoretically The Cable Should Want To Stay In, This Might Change Depending On The Cord Thickness. I Tested It With Usb Cables And A Thinkpad Power Cord. The Power Cord Have The Ferrite Bead For The Filtering, Which Aligns With The Magnet And Keeps The Ferrite Stuck To It As Well, Because There Is 1Mm Separation From The Magnet, The Strength Is Not Too High, Just Strong Enough To Keep It In The Place. V2- Has Holes For 2 Magnets (Only One Hole Is Enough, But If Somebody Wants 2, So Now He Has The Option To). More Aggressive Angle, Now The Top Gap Is 4Mm Wide. For Smaller Clips There Is This Design Also: Https://Www.Thingiverse.Com/Thing:2703830
Statistics
Likes
10
Downloads
0