3D Systems Cube 3 Adapted Nozzle
Description
This Is An Alternative Attempt To Free The Engineering Marvel That 3D Systems Created And Soon Dumped For Obvious Reasons. Reliability Being A Big One! Adaptation To 4Mm Bowden Tubes Created A Small Demand For Cartridge Replacement Hubs. There Are 3 Solutions I Know Of Today That Will Provide The Bowden Tube Adaptation. These Are Well Covered At The Print3Dforum. You Will Also Find A Hub In My Thingiverse Creations. Considering The Level Of Effort Required To Modify Stock 3Ds Hot-Ends, An Earlier Version Of This Nozzle Was Released On The Print3Dforum. Having Proven That A Printed Part Will Not Simply Melt In The Extruder Assembly, I Thought I'D Give This A Try. Feel Free To Provide Comment About Your Experience With This Nozzle, Pro Or Con. This Build Requires A Pc4-M5 Push-To-Connect Fitting. I Use A Very Generic Version Of The Fitting. I Have Removed The Older Version In Favor Of The Current Download (V1). I Also Included A Set Of Two Parts In A Cube3 Abs Print File That Utilizes The Left Side Cartridge. The Images May Not Be Fully Up To Date But The Parts Certainly Are. Edited: April 14Th, 2019.
Statistics
Likes
50
Downloads
0