360° Thrust vectoring (TV) unit

Description

A 360° Thrust Vectoring Unit For 70Mm Edf'S. The Unit Should Be Scalable As It Originates From A Smaller Design, Plus You Have The Ability To Tighten The Nozzle Via A Screw Helping You With Tolerances. <B>The Ball Joint Has An Inner Diameter Of 62.8 Mm On The Thrust Tube Side. You Can Mount The Unit Normal (One Servo For Horizontal/Pitch And The Other Servo For Yaw Movement) Or Tilted By 45° To One Side Were Both Servos Are Mixed Together To Achieve Pitch And Yaw Movement (A Simple Elevon Or Delta Mixer) ____ Required Parts: - 2X Push Rods With Z-Bends Or Ballheads - 2X 9G Servos - 1X ~2,5 X 8 Mm Wood Screw

Statistics

Category

Tags